Hold the Boundary guide

Hold the Boundary user guide

The complete manual for the Hold the Boundary template: setup, the counting rule, and the honest way to bank a run — so the days you held the line are never erased by the day you didn't.

The short version — quick start

Hold the Boundary is a Notion template built around one remembering widget, the Boundary Counter: you name your boundary, it counts the full days you've held it, and when a run ends you bank the days into your history. Five steps and you are running:

  1. Duplicate this template. Click Duplicate (top right of the template page) so the whole system copies into your own Notion. Everything after this happens in your copy.

  2. Mint your counter link. Open the Boundary Counter builder and press the button to make your personal counter link. That link is yours alone — it's the key to your data (the privacy section below explains exactly how).

  3. Replace the embed. On your Dashboard, the counter you see is a fresh placeholder. Replace its embed with your personal link, following the bold "Make this counter yours" note right above it.

  4. Paste your link in the Dashboard note. The Dashboard has a Widget links note — paste your personal link there. If you ever need to rebuild a page, your key is written down where you'll find it.

  5. Name your boundary. Open the counter's settings, write the line in plain words — "No contact with Alex," "No work email after 7pm" — and set the honest start date. The count begins.

Don't own Hold the Boundary yet? Get it on Gumroad — $19, one payment with free updates, then come back here for setup.

The idea

What this system is

A boundary you set in January is invisible by March. Willpower without a count fades — and the first hard day doesn't just break the streak, it talks you into believing there never was one. This template makes the line, and every day you've held it, impossible to miss.

At the center is the Boundary Counter, a widget that remembers. It carries your boundary's name, counts the full days of your current run on its own, shows your milestones, and keeps your totals: longest run, days banked, runs banked. Around it, four pages do the human work:

Dashboard — the counter as the hero, your boundary and why it exists written in your words, and your totals mirrored by hand. Boundary Log — the paper trail: every run, what happened, what you learned. When It Breaks — the four-step ritual for the hard day, so a break becomes a procedure instead of a collapse. Weekly Look-Back — the numbers and three honest questions, once a week, in about two minutes.

Before you start You need a Notion account — the free plan is enough. Do the setup on a computer if you can; minting the link and swapping the embed is a one-time keyboard job. After setup, daily use is phone-friendly — the counter is one tap on any device, and every device shows the same numbers. Work through the Start Here page inside the template first; this guide is its longer companion.

Setup

Setup in ten minutes

The quick start above is the whole runway. This section is the same setup with the details filled in.

  1. Mint your personal link

    Open the Boundary Counter builder and use it to create your personal counter link. You can also pick a theme and colors there — the look is yours. Copy the final link the builder gives you; it ends in a long random code, and that code is what makes the counter yours.

  2. Swap the embed on your Dashboard

    The Dashboard ships with a fresh, empty counter embedded. Follow the bold "Make this counter yours" note above it: delete or edit that embed and put your personal link in its place. From that moment, the counter on your Dashboard is your counter, saving to your link.

  3. Write the link down in the template

    Paste your personal link into the Widget links note on the Dashboard. This is your spare key, kept inside the house: if you ever rebuild a page or re-duplicate an updated template, you paste the same link back in and your whole history is there.

  4. Name the boundary, set the date

    Open the counter's settings. Write the boundary in plain words — the way you'd say it out loud. Then set the start date honestly: the day this run actually began, even if that was before today. Fill in the My boundary note on the Dashboard too — the line, and why it exists. That "why" is what you'll reread on the hard day.

  5. Star the Dashboard

    Star the Dashboard so it's one tap away on your computer and your phone. It's the page you'll open to see the number — and the number is the point.

The rule

How the counting works

One rule, no surprises: the counter counts full days completed.

If your run starts today, the counter reads 0 — today isn't finished yet. Tomorrow it reads 1: one full day held. A run that started 30 days ago reads 30. All the math is in whole days, counted on your own clock, so the number never jumps or drifts with timezones.

Banking uses the same math: a run banks the number you see — whole days from its start to the day you bank it, that day not included. The number never changes just because it was banked. And if you set a start date in the future by mistake, the counter simply reads 0 until the days start completing.

Milestones land at 7, 30, 90, 180, 365, 730, and 1000 days on the current run, and the counter shows how many days stand between you and the next one. Your stats row always shows your longest run (current or banked), your days banked, and how many runs you've banked — the totals that survive any single run.

When a run ends

Bank it — or reset it, honestly

Every run ends one of two ways, and the counter keeps them deliberately separate. They are not interchangeable.

Bank this run is the honest ending. The run closes today, its held days are added to your banked total, and the run is saved to your history with an optional note — what happened, in a line. Nothing is erased; the boundary stays named. The counter then sits in its banked state showing your totals and history until you press Start a new run, which begins today (or on a date you pick in settings).

Reset this run is a plain restart. The current run's start date moves to today and its unbanked days are discarded — not banked, not saved to history. The confirm box says exactly that before anything happens, so the two can never be confused. Reset exists for a run that was set up wrong — a bad start date, a boundary renamed mid-run — not for making a hard day disappear.

The day it breaks: the four steps

The When It Breaks page in your template spells this out, and it's the heart of the whole system:

  1. Bank the run, with the note. The days you held count. Write what happened while it's fresh.

  2. Write it in the Boundary Log — facts, not verdicts: what happened, what you learned.

  3. Read your reason. Your Dashboard carries why this line exists. If the line itself was drawn wrong, redraw it on purpose, in the open — never shrink it quietly.

  4. Start the new run today. Day 0. No waiting for Monday, no debt to repay. The banked days are still yours.

Your history shows your three most recent banked runs. Earlier runs still count in every total — the counter says so right under the list, because the embed stays compact on purpose.

Every week

The weekly look-back

Two minutes, once a week, on the Weekly Look-Back page. Numbers first:

  1. The current run — where it stands, and how many days to the next milestone.

  2. The totals — days banked, longest run, runs banked and logged. Mirror them onto the Dashboard note while you're here.

  3. Three prompts — what tested the line this week, what held, and what changes next week. Short answers. Honest ones.

The look-back is what keeps a boundary from quietly dissolving between crises. The counter counts the days; this page makes sure you're still the one who drew the line.

The honest mechanics

Your link is the key

The counter remembers without any account — and here is exactly how, in plain words. Your personal link is the key: your counter's data is filed under an unguessable 128-bit random token, with no account, name, or email attached, so there is nothing to browse or look anyone up by. The only way to load your data is to hold the exact link.

The honest limits, stated the same way every time: whoever holds the link can see that counter's data — your page's own privacy settings control who sees an embed — and a lost link means the data cannot be recovered. That is the deliberate trade for no sign-up. Only the counter's own numbers are stored; nothing personal is collected.

Two practical consequences. First, paste your link into the Dashboard's Widget links note during setup, the way the steps above walk through — it's your spare key. Second, share the page the way you'd share anything with a key in it: your Notion sharing settings decide who can open the page that holds the embed.

Quick fixes

Troubleshooting

The counter is asking me to make it mine

You're looking at the fresh placeholder embed the template ships with. It holds no data. Replace it with your personal link — step 2 of the quick start — and your real counter takes its place.

My count reads 0 but I started days ago

Check the start date in the counter's settings. The count is full days completed from that date — if the date is today or in the future, 0 is the honest number. Fix the date and the count corrects itself.

I banked a run and the number changed

It shouldn't have: a run banks exactly the number you saw, whole days from start to the bank day, that day not included. If the run was still showing today's partial day in your head, that's the difference — today only counts once it's complete.

I can only see three runs in my history

By design — the embed shows the three most recent banked runs to stay compact. Every earlier run still counts in your days banked, longest run, and runs banked, and the counter says so under the list. Your Boundary Log page is where the full paper trail lives.

I lost my personal link

Check the Widget links note on your Dashboard — setup had you paste it there. If it's nowhere, the data under it honestly can't be recovered; that's the no-sign-up trade explained in the privacy section. Mint a fresh link and start a new counter — and paste the new link in the note this time.

The counter isn't loading at all

Check the embed holds your full personal link, including the code after ?k= — a trimmed link loads nothing. Paste the complete link from the builder or from your Dashboard note.

Buy once, it's yours

Updates and your copy

Hold the Boundary will be improved over time, and updates are free for buyers. Here is exactly what an update means for the system you are running — no surprises.

Your copy is yours, forever

The copy you duplicated into your Notion is yours alone. It never changes under you, it never expires, and it keeps working exactly as it is. Updating is always your choice, never a requirement.

Your data is not in the template

This is the part that makes updates painless here: your counter's data lives on your personal link, not inside the template pages. So for a bigger update you can duplicate the new version free, paste your same personal link into the new Dashboard, and your count, your banked days, and your history are all still there. Nothing you've earned is trapped in the old copy — keep it as your archive, or delete it; the counter doesn't live there.

Smaller updates

When an update is just wording or a new page, the update notes will include simple instructions to add it to your existing copy in a couple of minutes. Each announcement will say plainly which kind it is: add-it-yourself, or duplicate-the-new-version.

Questions

Hold the Boundary FAQ

What Notion plan do I need?

The free plan is enough. The template uses standard Notion pages and one embedded widget — no paid features, no databases to maintain, no formulas to break.

Do I need a Spud account?

No. There is no Spud account and nothing to log into. Your counter works off your personal link — the privacy section above explains exactly how, including the honest limits.

What happens when my run breaks?

You bank it. The days you held go into your banked total and your history, with a note on what happened — then you start the new run the same day. The When It Breaks page walks the four steps. A break costs you a run; it never costs you your proof.

Can I hold more than one boundary?

One counter holds one named boundary — that's deliberate; a line you can state in one sentence is a line you can hold. If you have a second boundary, mint a second personal link from the builder and embed it the same way. Each link is its own counter with its own history.

Why does my counter say 0 on the first day?

Because the count is full days completed: the start day reads 0, and the first full day lands tomorrow. It's the honest count — no credit for a day that isn't finished yet.

What if I lose my personal link?

Check the Widget links note on your Dashboard first — setup had you paste it there. If it's truly gone, the data under it can't be recovered; that's the deliberate trade for no sign-up, stated up front in the privacy section. You can mint a fresh link and start again.

What if it is not for me?

If it doesn't work in your Notion or it's not for you, email hello@robotpotato.net within 14 days and I'll refund you. Gumroad handles the mechanics.

How do I get help?

Email hello@robotpotato.net — that's the Spud Widgets support address, and it reaches a real person.

See the templates

Free widgets, the Progress Planner, and the Habit System live on the Templates page.

Browse templates →